800-982-6966 Fax 530-589-2510
Measuring for an Rectangle Dome
| The Dome Cover will need to overlap
the extreme outside edge of the pool.
It will then hang down about 6" to 8" and be secured to the uprights of the pool via a tensioned "bungee" style cord. (It fits much like a "tight" shower cap) Please provide the measurements in feet & inches to the nearest 1/4". ALL measurements need to be taken at the outside edge of the pool as indicated by the red lines shown in the pictures below. We will make your New Dome to these dimensions so please take your time and be accurate. |
| Using the diagram below fill in bird's eye view diagram of your pool.. |
 |
 |
Please count each upright
around entire pool. # uprights =_____
Brand of Pool if known:
______________________________
Pool Manufacturers stated
Pool Size = _____x_____ foot rectangle
| Name: _______________________________
(W) Phone # (_____) _____-_______ (H) Phone # (_____) _____-_______ Fax # (_____) _____-_______ |
| Notes: ________________________________________________
_____________________________________________________ _____________________________________________________ _____________________________________________________ |