800-982-6966 Fax 530-589-2510
Measuring for a Round Dome
| The Dome Cover will need to overlap
the extreme outside edge of the pool.
It will then hang down about 6" to 8" and be secured to the uprights of the pool via a tensioned "bungee" style cord. (It fits much like a "tight" shower cap) Please provide the measurements in feet & inches to the nearest 1/4". ALL measurements need to be taken at the outside edge of the pool as indicated by the red lines shown in the pictures below. We will make your New Dome to these dimensions so please take your time and be accurate. |
 |
 |
| Measure the entire perimeter of
the Top Cap of the pool. Perimeter = _____ft. _____in. |
Measure Center to Center on 1
of the Top Rail Section Panels. Section = _____ft. _____in. |
Total # of Uprights around
pool ______
Brand of Pool if known:
___________________________
Pool Manufacturers stated
Pool Size = ______ foot Round
(your
perimeter measurement will probably be much larger, as normally a pool
size is stated
as
a Wall to Wall dimension and yours will be an Outside Top Rail to Top
Rail dimension.)
| Name: _______________________________
(W) Phone # (_____) _____-_______ (H) Phone # (_____) _____-_______ Fax # (_____) _____-_______ |
| Notes: ________________________________________________
_____________________________________________________ _____________________________________________________ _____________________________________________________ _____________________________________________________ _____________________________________________________ _____________________________________________________ _____________________________________________________ |