Universal Boat Skirt

Protect the part of your boat a standard cover leaves exposed. The Universal Boat Skirt adds 30 inches of coverage to shield the hull, gel coat, graphics and decals from direct sunlight during storage.

Each set includes two separate panels: one for the port (left) side and one for the starboard (right) side. Both tuck beneath your existing cover above the rub rail. Add the complementary stern skirt for coverage across the back of your boat; both products can be purchased together in Sunbrella® or Sun-DURA®.

Boat skirt extending below a fitted cover along the sides of a stored boat Enlarge Photo
Shown with a boat cover, sold separately. Skirts provide the added protection below the cover.
Lengths
18–35 ft.
Added coverage
30 in.
Includes
2 separate side panels

Select Your Skirt

One set includes two separate panels, one for each side of your boat.

Select Fabric
From $326.11 per pair
Review Accessory Order

Two Marine Fabric Choices

Sunbrella® Marine Acrylic

9.25 oz. solution-dyed acrylic with breathable protection for your boat’s finish.

From $595.63 per pair

Explore Sunbrella® Fabric

Sun-DURA® Marine Polyester

7.6 oz. marine polyester with water-repellent protection and a choice of colors.

From $326.11 per pair

Explore Sun-DURA® Fabric

Measure for Your Boat

Measure from the tip of the bow to the stern, following the curve of the rub rail along one side. Select your skirt length using that measurement, rather than the boat’s straight overall length.

Includes
Two separate side panels (port and starboard)
Size
18–35 ft. lengths per side
Coverage
30 in.
Use
Storage only

Install Beneath Your Cover

Foam pipe insulation is required and is not included. Look for tubing with an outside diameter (OD) of 1½–2 inches, available at most home improvement stores. You’ll need enough to fill the upper sleeve of each skirt.

  1. Trim the foam tubing to length with scissors and insert it into the upper sleeve.
  2. Tuck the filled sleeve beneath the cover hem, above the rub rail.
  3. Secure the boat cover to hold the skirt in place.

We’ll send detailed installation directions with your order.