Pool Liner & Pool Cover Repair Services

Vinyl liner patch kits provide repair material and adhesive for small holes, cuts, and tears.

Patch size & material

Small kits include 1 ft × 10 ft of patch material, medium kits 1 ft × 20 ft, and large kits 1 ft × 30 ft. All include 20-mil light blue vinyl and HH66 adhesive.

When a patch is not enough

For damage along the waterline or widespread liner wear, see the Ameri-Shield and replacement liner options below.

Ameri-Shield / Fix-A-Liner covers damaged areas above the waterline on compatible inground vinyl liners.

Height & ordering length

Ameri-Shield is 10 inches tall. Order by the linear foot with a 20-foot minimum, or select a complete pool kit. Measure the height and length of the damaged area to check coverage.

Check the attachment

Compare your bead and track with the supported profiles. Contact us if you need help checking the fit or condition of your liner.

T-Lock, also called bead lock or liner lock, helps hold a loose liner bead in its receiver track.

Available lengths & fit

Select a 50, 100, 125, or 150 ft length. Measure the run you need to secure and compare your bead and receiver with the product’s profile diagram.

When the track needs repair

If the receiver track is damaged, review the replacement-track options below.

Replacement liner track is available in side-mount and top-mount profiles for beaded liners.

Select the mounting profile

Side-mount track fastens inside the pool wall. Top-mount track fastens to the horizontal top surface. Match the profile to your pool and liner bead.

Length & section quantities

Both profiles come in 8-foot sections. Measure the total length needed and round up to the next whole section when calculating your order.

Have your mesh or solid safety cover inspected for tears, worn webbing, and damaged padding.

Before sending your cover

Review the repair form and shipping instructions, and note the areas that need attention.

Review your repair estimate

Inspection determines which repairs are possible and what they will cost. Work begins after you approve the estimate.

Find replacement springs, deck anchors, and a tensioning tool for compatible safety-cover systems.

Match your existing hardware

Match the dimensions and attachment style to your existing springs or anchors.

Check pack quantities

Springs and anchors are sold in packs of 10. Tensioning tools are sold individually.

Replace a worn inground vinyl liner with one made to fit your pool.

Measure for a new liner

Use the measuring guide for your pool shape to record its dimensions and liner attachment.

Patterns & options

Browse the available liner patterns and options before requesting your quote.

The Copy Cat program uses your old safety cover as a template for its replacement.

Template & anchor fit

Your old cover provides the size, shape, and strap layout. Without it, ask us about an A-B measurement layout to check the existing anchor positions.

Existing deck anchors

New anchors are not included with the replacement cover.

Order replacement fabric for your existing automatic pool-cover system.

Measure the cover, not the pool

Record the actual cover width and length in feet and inches. Follow the measuring diagrams on the order page rather than using the pool dimensions.

Fabric-only replacement

Confirm your cover system and fabric details before requesting a quote. The automatic mechanism is not included.