Side Mount Track
Check that the inside face is accessible and provides a sound fastening surface.
Replace the receiver that holds your liner bead. Compare the mounting profiles, then select the sections you need.
Compare the mounting-face width, channel opening, and bead shape with your existing track. The mounting profile alone does not confirm fit.
Check that the inside face is accessible and provides a sound fastening surface.
Check access to the top surface and clearance beneath any coping or deck edge.
This receiver is for a compatible beaded liner. It is not an overlap or J-hook attachment. Compare the Ameri-Brand liner bead diagram with your liner.
Have your installer confirm the mounting surface, fasteners, and access before removing existing track. Do not attach replacement track to a loose or damaged surface.
Confirm mounting hardware requirements with us before ordering. For an unfamiliar profile, send close-up photos of the bead, receiver, and mounting surface.
If the receiver is sound and only the seated bead needs help staying in place, review T-Lock bead lock. T-Lock is a retaining strip; it does not replace damaged track.
Sold in 8-ft. sections.
Shipping to the lower 48 states: $18 for the first section, plus $3 for each additional section.
Select a mounting profile