Measuring for a Fabrico Sun Dome

Traditional metal-walled pools are divided into panels by their support uprights. The number of panels is important because it equals the number of aluminum supports that hold up the dome. An incorrect count means your new dome will have too many or too few supports.

If counting panels is difficult, count the uprights instead; the number will be the same.

Not all soft-sided pools are divided into panels like traditional above-ground pools. The measurements you need depend on the shape:

• Rectangular pools: measure the length and width. A panel or upright count is not required.
• Round pools: measure the diameter and count the panels or uprights.
• Oval pools: measure the length and width and count the panels or uprights.

If counting panels is difficult, count the uprights instead; the number will be the same. Use the soft-sided measuring sheet above to record the top-rail details.

Inground Sun Domes require width and length measurements. Select a dome large enough to allow walking room around the pool. Failing to preserve enough deck space can make movement inside the enclosure difficult and even dangerous in an emergency.

Always select a dome at least as large as your pool. Undersizing leaves part of the pool uncovered and can require a difficult custom installation. Check the model-specific installation and wooden-base dimensions before building the base.